When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Selling the following kit all in Gloss White per order, 3 total decals
* Quantity 1 : NeoGeo 18.5\" inches wide by 3.5\" (46cm x 9cm)
* Quantity 1 : MVS 9\" inches wide by 2.5\" (23cm x 6cm)
* Quantity 1 : SNK 14\" inches wide x 2.5\" (36cm x 6cm)
*** I have attached a photo of available colors ( last image) and if you put in notes I can send in that color, if NO notes/message for different color then order will be sent out in the Gloss White
Material: I use High quality vinyl with average life of 5-6 years outdoors (longer if used indoors)
Instructions to apply decal/Sticker
***On decals larger than 6\" it is recommended for someone with experience or shop install for best results as you may get bubble\'s when applying.
Before applying please make surface is clean , we typically will wipe surface with
50% isopropyl alcohol and wipe dry with a clean dry microfiber towel.
1. Lay decal face down and on flat surface
2.Slowly remove backing paper at a 180 degree angle,make sure
the decal is sticking to the translucent Tape side.
3.Apply to a clean,non-porous surface.
4.Using an object with a hard flat edge(Squeegee is recommended but some have used credit cards),
press the translucent transfer tape firmly,concentrating on the vinyl areas,working from the
center of the decal outward.
5.Carefully remove the translucent transfer tape from the decal at a 180 degree angle,
making sure the vinyl decal adheres to the surface being applied to.
6. After removing all of the translucent transfer tape you may need to press down decal to
ensure it is flat against surface being applied to.
