Boride series T2 + (1/8 x1 x 6") Sharpener stones set (8 pcs.) + For Sale

Since the Boride (USA) factoryis changingtheir labeling without ourpermissions, we reserves the right

do not inform buyers on about it happened- adifferent markings do not affect the sharpening

characteristics of sharpening stones

DESCRIPTION

Boride sharpening stones are used for sharpening knives Apex style sharpeners (TSPROF, Hapstone, KaZaK, Edge Pro Apex etc.)

Boride offers a wide range of stones with different performance values and different rates of wear.

Boride T2 series stones are made of aluminum oxide.

All Boride stones are 3.17 mm thick and they are mounted on high-quality aluminum blanks (CANADA).

This is the Edge Pro Apex stones STANDART that are 3.17 mm thicknesses Boride (1/8" thicknesses Boride) + mounted to 0.125" high-quality aluminum blank.

Boride stones should be used with one of theselubricants:

·Water

·Soapy water

·Boride Bori-Lube

·Water solution of dipropylene glycol

·WD-40 (for experienced users only)

·Refined olive oil (for experienced users only)

·Oleic aсid (for experienced users only)

In case of using the water as lubricant, soak the stone in water for 1-2 minutes.

In case of using the oil, put a small amount (1-2 drops) of honing oil on the stone’s surface and spread it evenly over the stone with a finger.

If the stone absorbs the honing oil, use larger amount of oil.

Boride Stones may have the following minor defects:

·Saw strokes on the work surface

·Residues of lacquer

·Small chips at the corners and along the edges (no larger than 1 mm)

All these defects will be eliminated during preparation of the stone.

The majority of sharpening stones requires preparation, and Boride stones are no exception.

Additional lapping can be performed by customer to improve sharpening quality.

We recommend to use loose silicon caroffere powder or diamond lapping plate.

8 stones

T2 150
T2 220
T2 320
T2 400
T2 600
T2 800
T2 1000
T2 1200

Aluminum Oxide

Wear-resistant series for all steels.